how to replace a shower enclosure how to properly caulk your bathtub or shower

by:C&Y Union     2020-03-17
Caulking is an important maintenance process that ensures that no water penetrates into the tiles at the seams between the tile and the bathtub or shower.Remember: don't take water leakage or aging for granted.The beginning may be a harmless brown tone along the edges of the caulk, which may eventually lead to crispness and cracks.
In turn, leaks, paving the way for water seepage, causing mold and mildew to pile up, or may loosen the tiles in the surrounding area.Once this is achieved, the repair process can be more expensive and longerconsuming.Before this happens, clear the leak or aging leak!Is there a problem right now?Luckily, caulk is cheap and it's not as complicated to rearrange the bathtub or shower as you think.
You can even do it yourself!With some common tools and some materials from the hardware store, you can find new caulkers in the bathroom quickly or in an hour or two.Here are five simple steps for filling: 1.Remove the old caulking agent.Old Corker may be stubborn.But it's not hard to delete it, you have a lot of options.
If caulk is water-based, you can soften it with a hot gun.You can also use sharp plastic blades;Metal blades can scratch the sink and bathtub.Also delete products such as filling and filling-Be-But these can hurt the plastic.
2.
Scrub the area clean.
The best material you can use to remove all traces of caulk residue is a dry, non-abrasive scrub.The silicone caulking agent can be cleaned up with a slightly wet soft rag and mineral spirits.You can also choose to wipe clean with transgender alcohol.
3.
Use a mildew-proof cleaner.
Before recking king, spray the joints with mildew-proof agent to completely eliminate any signs of residual mildew.After completion, completely dry the area with a paper towel, dry rag or hair dryer.4.Then fill in the tapeProfessionals-Looking for work, first apply parallel tape along the length of the joint.
Use the blue painter's tape to separate them about 1/3/8.The caulking should be between the two strips, and the tape should help to keep the application straight, even away from the surface that should not appear.While you have the option to use the caulking gun, the extrusion tube is much easier to control for novice users.
You'll want the tube to open just right, not too big to avoid applying too much caulking on the joint.You can always add more caulkers where you need them instead of spreading them across large chunks.5.Smooth and remove (tape ).Suppress lint after completionFree rag or paper towel, place it on your finger, smooth the cauldron into the joint with your finger, pull it in a fluid motion to make freshTake out a piece of tape at a time and be careful not to expose it to a fresh cauldron.
Wait 24 hours before using the bathtub or shower.You got it!An easy, do-it-Solve your water leakage and mildew problems by yourself.If you are looking for a, MN be sure to access the catalog and get a list of contractors that can help you with your home repair needs.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...