10mm glass shower enclosures How to Install a Sliding Glass Shower Door

by:C&Y Union     2020-03-21
Sliding glass shower door in bathroom is the next big thing.Let's see how to install and uninstall the sliding glass shower door.The shower curtain in the bathroom separates the dry and wet areas.
The shower door is the perfect alternative to the shower curtain with different types such as closed doors, plain glass doors or sliding glass doors.Choose between frameless doors or frame doors, subject to the most suitable doorxa0Your bathroom.Sliding glass doors are suitable for compact, small sized bathrooms.
They made the bathroom look neat.
Here isxa0Guide for installation and removal of these doors.Installing the sliding glass shower door is a simple project, which is relatively simple if you do it yourself.To do this, you need a shower door kit with complete hardware, caulkers, drill bits, hammers, masking tape, tape measure, hacksaw and center punch.
The following instructions will help you understand the installation from scratch.The first step is to measure the width of the shower opening in order to install the door.Mark this area on the door track.Cut the door track with a steel saw of the required size.
Next, you will need to install the track and use the concealer glue to bring you the position to keep the track.Install the door post on the track.One leg of the door frame will be shorter.This side needs to be facing the shower wall.
Mark the position of the track around the bathtub with a pencil.Once you have marked the position of the track, remove the door post and the track.Punch in the marked position with a 3/16 drill bit.
Once the hole is dug, clean the area and hammer the plastic anchor with a force.Plastic anchors are part of the hardware that comes with the entire glass door kit.Fix the glass door in place with a waterproof sealing material specially designed for the bathroom.
Apply some caulking agent (water tight sealant) in the area where the door will be installed ).Install the door and door frame together with the bumper and gasket as part of the door hardware.Next, the track at the top and bottom needs to be cut so that the track fits perfectly with the frame.
By placing the roller on the inner rail, hang the door from the top rail.Align the flush door according to the door panel frame and tighten the door through the slot.Cover the door frame with some caulking agent to complete the installation process.
Please fix the handle if it is not already on the door.Installation is complete.It's very easy to remove the sliding glass shower door and you can do it yourself instead of calling "guy" to do it for you.You need a screwdriver, a crowbar or a crowbar, a washer and a Caulder to remove the door.
Remove all screws that place the shower door against the door frame and track.Standing in the shower room, grab the door with both hands and lift the bottom of the door as much as possible.Tilt the bottom of the door to you and remove it from the top track.
Your shower door was removed!!If you have two doors, repeat the same procedure for the second door.Be sure to note that the glass door should be firmly held to prevent it from falling and breaking.Next, you need to remove the door frame and track.
These are usually screwed together.
They are also sealed with a caulking agent for a firmer grip.You can scrape the cauldron with a tool knife or Caulder.Unscrew the track and release the track with the help of the crowbar.
Now your hands can easily remove the track.Take it out carefully and scrub it clean.There are many advantages to these doors.They are easy to clean, prevent water from entering the dry area and have a longer service life.The bathroom was also easy to clean.It's also easy to install one in your bathroom or remove the existing one for cleaning purposes or with a new replacement.
If you are thinking about bathroom remodeling, you can consider sliding glass shower doors.You can choose these doors according to the shower tile pattern to make the bathroom look more magnificent
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...